Library · 9 steps · Works in the free app
Fit a carpet
Fit a carpet in one room with gripper rods and separate underlay.
Works in the free Sequence Lite app. Download the file and open it to add it to your Library, then change it to suit you.
What you need
- Stanley knife and spare blades
- Pliers
- Flat bar
- Work gloves
- Knee pads
- Vacuum or broom
- Gripper rod (room perimeter plus 10%)
- Hammer
- Gripper nails (masonry nails for concrete)
- Tenon saw or tin snips
- Safety glasses
- Underlay (room area plus 10%)
- Staple gun and staples
- Underlay tape
- Carpet (room size plus 10 cm each way)
- Tape measure
- Straight edge
- Chalk line
- Knee kicker
- Power stretcher (hire)
- Carpet wall trimmer
- Bolster or stair tool
- Door bar or threshold strip
- Screws and screwdriver
The steps
- Clear the room and lift the old floor
- Fit the gripper rods
- Lay the underlay
- Roll out and rough-cut the carpet
- Hook the first wall
- Stretch the carpet across the room
- Trim and tuck the edges
- Finish the doorway
- Rehang the door and check the finish