Sequence

Guide

How to use Sequence

Sequence walks you through a job one step at a time, with timers that tell you when to move on: a brake bleed, a roast dinner where everything is ready together, a glue-up that needs to cure. This guide shows how to make your own sequences and covers everything the app can do.

01 / Getting started

Getting started

Sequence runs on Android 11 or newer. It works offline: there is no account and nothing is sent anywhere. You only need a connection to open web links in a step and to visit this website.

The first time you open the app, four welcome cards say what a sequence is, how to run one, how to make your own and where to find examples to start from. Swipe or tap Next; the last card's Take the tour goes straight to the first step of the Sequence tour, a ten-minute sequence that shows everything a sequence can do. Example - Two-minute tidy is in your Library too, for a quick try: one small job, one timer and a real alarm. Open it in the editor to see how a sequence is made. Skip closes them, and Show the welcome again in Settings › Help brings them back.

Until you have run the tour, a New here? card at the top of the Library offers it too (No thanks hides it for good). The Library also offers:

  • Browse example sequences opens the online library, where you can download one, open it in the app and change it to suit you.
  • How to make a sequence opens this guide.

You can also tap + at the bottom of the Library to start a new sequence straight away.

Words used in this guide

A sequence is the procedure you write once: its steps, notes and timers. A run is one time through it, from the first step to Finish. Each sequence has at most one run in progress. Sequence Lite keeps one run in progress at a time; Sequence Pro keeps up to 5, so you can set one aside and run another.

02 / The Library

The Library

The Library is the home screen. From top to bottom:

  • Search and Settings buttons in the header. Search opens a search box in place of the header, ready to type in; the back arrow beside it (or your phone's Back) closes it. A search looks through every folder, not only the one you are in.
  • A Pick up where you left off card for each run in progress, showing how far it got: the one you were on last first (marked Running now, or Paused), then any you set aside, most recent first ("set aside at 14:05"). Resume takes you back to it. Hide under the heading folds the cards away (Show brings them back; Sequence remembers your choice), and they slide out of the way while you search.
  • Category chips, once your sequences are in more than one category. Tap one to show only that category.
  • Folders, once you have made one, with New folder beside the heading. See Folders and categories.
  • Your sequences, with how many there are: each row shows the cover picture (or the number of steps), the title, and the category and step count. A sequence with a run in progress says In progress. Sort beside the heading puts them A to Z or by Last done (most recently finished first, then the ones never finished, A to Z); the app remembers your choice. Pinned sequences stay at the top whichever order you choose (see below).
  • The bottom bar: Library, + (a new sequence, step by step, in the editor or with AI, or a New folder) and Import / Browse.

What you can do with a sequence

  • Tap it to open its Overview: how long it should take, every step's title and any warnings at a glance, and an Items required tab that gathers the tools and materials from all the steps, in the order you first need them. Tick each item off as you gather it: the line above Start Sequence counts them ("3 of 7 required items collected") and reads Ready to start once everything is ticked. If anything isn't ticked when you tap Start Sequence, Sequence lists what's left and asks Do you have everything you need? Yes starts the run anyway; No takes you back to gather it. Once you have finished a run, the Overview also says when it was last done and how long it took ("Last done 3 Oct · took 42 min"); abandoned runs don't count.
  • The ⋮ menu on its row: Start Sequence, Edit, Pin to top (or Unpin), Move to folder, Duplicate, Share, Suggest for the library (your own sequences only), Add to home screen and Delete.
  • Pin it with Pin to top in its ⋮ menu to keep it at the top of the Library, above the others in either sort order, even if it is filed in a folder: it stays in its folder too, so you can keep things organised and still reach your favourites quickly. Its row says Pinned. Pin as many as you like; Unpin puts it back in order. Pins stay on your phone: sharing a sequence never includes them.
  • Swipe it to the left to delete it. Either way, Undo appears for a few seconds.

Missed the Undo? A deleted sequence stays in Recently deleted (in Settings, under Library) for 30 days. There, Restore puts it back in its folder, and Delete for good (or Delete all for good) removes it and its pictures at once. After 30 days it is deleted for good on its own.

Duplicate makes a copy, titled "(copy)", next to the original, pictures included. It is a handy way to make a variation of a sequence.

Add to home screen (Sequence Pro) puts an icon for that sequence on your phone's home screen. First choose what tapping it does: Open the overview (so you can check the items required, or choose how many times to loop, before you tap Start) or Start the sequence straight away. Then your phone asks you to confirm. The icon's corner tells them apart: a play symbol starts the sequence, a list opens the overview. You can have one of each for the same sequence; adding the same kind again updates the icon already there. If that sequence is already running, you go back to the run; if it was set aside, you choose Resume or Start again; if another one is running, Sequence Pro sets it aside and Sequence Lite asks first. The option is missing if your home screen app doesn't take shortcuts.

03 / Make your first sequence

Make your first sequence

Step by step

New to Sequence? In the Library, tap + and choose Step by step wizard. It asks one thing at a time: what the sequence is called (and, if you like, its category), then for each step what you do, anything to add, what you need, about how long it takes you (used for the Overview's estimated time, not a timer) and whether it needs a timer. If you give the timer a time, Wait for it before the next step decides whether the step must wait for it. Tap Add another step for the next one, or That's all the steps. The last page shows the whole sequence: tap a step to change it, then Save. Back goes to the question before.

The result is an ordinary sequence. Open it in the editor later to add pictures, checklists, links and the other timers.

In the editor

  1. In the Library, tap + and choose Advanced editor. The editor opens. (If a folder is open, the new sequence goes in that folder, whichever you choose.)
  2. Type a title. Add a description, a category and a cover image if you like.
  3. Tap Add step, then tap the new step to open it. Type what to do in What to do, and any detail in Notes. Tap Done.
  4. Add the rest of the steps the same way. Drag a step to move it, or use Move up and Move down in its ⋮ menu. Duplicate in the same menu puts a copy of the step just below it (with its timers, checklist, notes, links and pictures, but not in a finish-together group) and asks whether to edit the copy.
  5. Tap Save. The sequence appears in your Library.

Each step can also have notes and warnings, a list of what you need, links, pictures, a checklist and timers. Add them in the step editor, in any combination.

Or have an AI write it

An AI assistant can turn a recipe or a set of instructions into a sequence for you, timers included. In the app, tap + in the Library and choose Create using AI (or Make one with AI on an empty Library) to come here.

  1. Download the Sequence guide for AI. It tells an AI exactly how to write a sequence file that the app accepts.
  2. Give the AI the guide and your recipe or process (attach the files, paste the text, or give a web address), and ask it to make a Sequence file from it following the guide. An AI that can read web pages can be given the guide's address instead of the file.
  3. Save the .seq file it makes to your phone and import it.
  4. Check it before you rely on it: open it in the editor and compare the quantities, times and warnings with the original. An AI can make mistakes.

Not sure what to say? Attach the guide, then paste this and add your recipe or instructions at the end:

I've attached the Sequence guide for AI. Following it exactly, turn the recipe or instructions below into a Sequence file (.seq) that I can download and import.

- One action per step, with a short title that starts with a verb, and the detail in the notes.
- Use a step timer for every wait ("bake for 20 minutes", "leave to cure for an hour").
- If several things must be ready at the same time, put them in a finish-together group.
- List what each step needs (tools, ingredients) on the step that first uses it.
- Put anything that could go wrong or hurt someone in a warning.
- Don't guess times or quantities that aren't given: ask me first.

Here is the recipe or instructions:
[paste them here, or give a web address]

Problems are shown where they are

The editor checks the sequence as you go. A problem, such as a step with no title or a timer that holds an earlier step, is marked in red next to the step it belongs to, and Save says how many there are to fix. Nothing is lost: fix them and save again.

If you leave the editor with unsaved changes, it asks whether to Save, Discard them or Keep editing.

Your work is safe if your phone closes Sequence while you're away from it, for example during a phone call or a long time in another app. Next time you open Sequence, the Library asks whether to Carry on editing or Discard the unsaved changes. This works for the step-by-step wizard too. If you choose Later, Sequence asks again before you edit or start another sequence, so the changes you kept are never lost.

Typing a time

Every duration box takes minutes, m:ss or h:mm:ss. For example 15 is 15 minutes, 2:30 is two and a half minutes, and 1:05:00 is an hour and five minutes.

How long it takes

In the step editor, Time to do it is about how long the step takes you, not counting its timers. It's optional. The Overview adds these up with the timers, the way a run would go: a step whose timer must end takes at least that long, a step held by an earlier timer waits for it, and a background timer that ends last (the chicken resting) ends the run. It then says, for example, About 1 h 20 min · done by about 18:40 if you start now. With Ready by on, it gives just the length. If some steps have no time, it says At least instead, and a sequence with no times and no timers shows nothing.

04 / Writing good steps

Writing good steps

You will usually read a step with your hands full, so make it easy to take in at a glance.

  • One action per step. "Drain the oil" and "Replace the filter" are two steps, not one.
  • Start the title with a verb: "Clamp the joint", "Preheat the oven to 200 C".
  • Put the detail in Notes and keep the title short.
  • Use a warning for anything that could go wrong or hurt someone. Warnings are shown first, in their own colour.
  • Let timers do the remembering. If you would otherwise write "wait 20 minutes", use a step timer; if something should start later, hold that step.
  • List what you need on the step that first uses it. The Overview gathers it all into one list before you start.
  • Don't write the same steps four times. If some steps are done once for each wheel, each bed or each room, repeat them.

Repeating steps

Some steps are done once for each of several things: jack up, remove the wheel, bleed the brake, for each wheel of a car. Write those steps once and repeat them.

  1. At the bottom of the editor, under Repeat steps, tap Add repeat.
  2. Choose the first step to repeat, then the last one. A single step is fine.
  3. Type the things to repeat them for, separated by commas: RR, LR, RF, LF. You need 2 to 20.
  4. Tap Save.

When you run the sequence, the steps come round once for each item, in order. Write {item} in a step's title, notes, checklist, notes and warnings or what you need, and it is replaced by the item: "Bleed the {item} caliper" becomes "Bleed the RR caliper". If the title has no {item}, the item is added after it: "Jack up (RR)". A hold from a repeated step to another step in the same repeat holds that round's copy.

The Overview lists the repeated steps once, reading as the first round ("Bleed the RR caliper"), and lists what you need once per item when it contains {item}. To change or remove a repeat, tap it in the editor. Repeats can't overlap, and a repeated step can't be in a finish-together group.

Looping the whole sequence

Part of Sequence Pro. Some sequences are done several times in a row: plank intervals, coats of varnish, batches of bread. In the editor (or on the wizard's last page, where you check the steps), turn on Allow sequence to be looped. Its Overview then says it can be looped, and Start Sequence asks How many times to run this Sequence?: use − and + to choose from 1 up to 20 (fewer for a long sequence, as a run can have up to 300 steps); the line under the number says how long that many runs take. Then Start. If the sequence has times, the Overview gives the time per loop and each answer shows how long that many loops take ("3 times · about 30 min"). When the last step of a loop is done, the run carries straight on with step 1 of the next. The Player shows Loop 2 of 5 under the step count, which counts the steps of the loop you are in. Every loop has its own timers; background timers keep running from one loop into the next. A home-screen shortcut runs the sequence once. In Lite, a sequence marked this way runs once.

05 / Notes, warnings, tools and links

Notes, warnings, tools and links

Notes and warnings

In the step editor, under Notes and warnings, tap Add note or warning and choose Note or Warning. They are shown prominently at the top of the step, warnings first. Warnings also show under the step on the sequence's Overview; notes don't. A step can have up to 5, of up to 300 characters each.

Warning

Pry at the connector, never at the board.

Note

The connector is held by two clips.

Items required

Under Items required, tap Add tool for each tool, part or ingredient the step uses (up to 12, 80 characters each). They appear as chips on the step. The sequence's Overview lists everything from every step in one place, so you can gather it and tick it off before you start; the same item named on several steps is listed once. The ticks are kept on your phone, not in the sequence, so they stay while you come and go. When you finish or abandon a run, Sequence asks whether to clear them for next time.

Links

Under Links, tap Add link and paste a web address (it must start with http:// or https://), with an optional title. Up to 10 per step. Tapping a link in the step opens it in your browser, so it needs a connection.

06 / Pictures

Pictures

A picture is often clearer than words: a diagram, the part to look for, what "done" looks like.

  • On a step: in the step editor, under Images, tap Add images and pick from your gallery. Give each an optional caption.
  • Cover image: at the top of the editor. It is shown on the sequence's row in the Library.

While running, a single picture fills the width of the screen; several scroll sideways with dots underneath. Tap a picture to see it full screen.

LimitAmount
Pictures per step6
Pictures per sequence (including the cover)40
Size of all of a sequence's pictures15 MB

Pictures are made smaller when you add them (no side longer than 1600 pixels), so the limits go a long way.

Note

Pictures are not part of your phone's automatic backup. If you restore a sequence on a new phone, its steps say how many pictures are not on the device. To bring them back, import the sequence's file again and choose Replace (see Sharing, importing and backup).

07 / Checklists

Checklists

Under Checklist in the step editor, tap Add item for each thing to check while doing the step, such as "Edges are sealed" or "Oven is off". While running, tap an item to tick it. Ingredients, parts and tools belong under Items required instead, so they appear on the Overview's list before you start.

Turn on Tick every item before completing when the step must not be skipped over: Next step then asks you to tick every item first. Ticks belong to the run, so going back a step keeps them.

08 / Step timers

Step timers

A step timer times the step itself: "Preheat the oven: 15 minutes", "Leave the bleed nipple open for 2 minutes". In the step editor, turn on Timer on this step and enter how long.

  • Start automatically (off unless you turn it on): with it off, the step shows a Start timer button, so the countdown begins when you are ready, not when the step appears.
  • Can't complete until it ends: Next step stays locked until the time is up ("Next step unlocks when the timer ends"). If you really need to move on, tap it anyway and choose Override; the run log records that you did.
  • Sound: how it tells you it has ended (see Timer alerts). Alarm rings until you answer it, Chime plays one short sound, and Silent only shows the notification. Holds and background timers have the same choice. To set every timer in the sequence at once, tap Set every timer to… under the steps in the editor.
  • Move on when it ends: when the time is up, the step completes itself and the next step starts, so a routine runs on its own: 30 seconds of squats, a chime, 15 seconds of rest, a chime. Turn on Start automatically for each step's timer too, and choose Chime. It works with the screen off. It does not move on while the run is paused, while a required checklist is not ticked, or from the last step, which waits for Finish. The back arrow undoes it like any other step; the step's timer has already finished then, so it waits for you, with Start the timer again if you want to redo it.

While running, the time left is shown in a ring on the step. When it ends, the phone alerts you, even if the app is closed or the screen is off (see Timer alerts).

09 / Holding a later step

Holding a later step

Sometimes a later step must not start until some time has passed: "put the potatoes in 20 minutes after the chicken", "sand 24 hours after gluing". You set this on the earlier step.

  1. Open the earlier step and, under Hold a later step, tap Add cue.
  2. In Step to hold, pick the later step.
  3. In Wait, enter how long, and choose whether the wait counts after this step is completed or after this step starts.

What happens while running

  • If you reach the held step too early, it says Wait before starting this step with a countdown, and Next step waits for it.
  • When the time is up, the phone alerts you: "Time to start: Put the potatoes in".
  • If you are busy with other steps by then, a banner offers Go to step or Later. Going there lets you do that step out of order; a banner reminds you to return, and once it is done you are taken back to where you were.
  • If several holds point at the same step, it waits for the last of them.

A hold can only point at a later step. If you move steps around so that it points backwards, the editor marks it in red until you fix it.

10 / Background timers

Background timers

A background timer times something that carries on while you get on with other steps: "Glue cured", "Dough proved", "Chicken ready". It never blocks anything.

Under Background timers in the step editor, tap Add timer, give it a label and a duration. It starts when you complete that step. While running, every background timer is listed in the timers tray with a bar showing how far it has to go, and it alerts you with its own label when it ends. Tap Dismiss to clear it.

Background timers keep running when you pause the run, because what they time (food in the oven, glue curing) does not stop either.

11 / Finish-together groups

Finish-together groups

Some jobs need several things to be ready at the same moment, like a roast dinner. A finish-together group lets you say that, and Sequence works out when each item should start.

  1. Add a step for putting each item in, with the longest one first. Group items must be in the sequence longest first.
  2. At the bottom of the editor, under Finish together, tap Add group.
  3. Give the group a name, for example "Oven".
  4. Under Items and how long each takes, tap Add item for each one: a label ("Chicken"), the Step that puts it in, and how long it takes from going in to being ready. The editor shows when each one goes in, for example "Goes in 20 min after Chicken".
  5. Tap Done, then Save.

Sunday roast / Oven group

Chicken
60 min
Potatoes
40 min
Veg
20 min

The chicken goes in first. The potatoes are held until 20 minutes later, and the veg until 40 minutes later, so all three are ready at the hour.

While running, each shorter item is held until its time (see Holding a later step), and every item gets a "[Label] ready" timer in the timers tray from the moment it goes in. If you put something in late, its ready timer is late too: the app shows when it will really be ready rather than pretending it is in step.

Ready by a set time

Part of Sequence Pro. To have everything ready at a particular time ("out of the oven at 18:30"), open the sequence's Overview and turn on Ready by a set time, then pick the time. A time that has already passed today means tomorrow. The card says when the longest item has to go in, for example "Chicken in starts at 17:30." Then tap Start Sequence.

Use the same time most days? Tap Make this the default under the time. From then on that sequence's Overview opens with Ready by already on at that time (you can still change it for one run), and the card says which time is the default. Clear the default stops it. The default is kept on your phone for that sequence only: it is not part of the sequence, so sharing it never includes it.

A sequence without a finish-together group can have a ready-by time too, as long as it has an estimated time: then the time means "all done by", for example "out of the door by 8:15". The app adds up the steps' estimates and timers and holds the first step until it is time to start, so the card says something like "Shower starts at 7:15." For this to be right, give every step an estimate, or a timer. The Morning routine in the online library is made for this: an hour from shower to front door.

When you reach that step it is held until its time, with the countdown on screen, and the app alerts you when it is time to start it. Do the steps before it at your own pace. If you are still on an earlier step when the time comes, the step is shown as due so you can go to it. The hold keeps to the clock even if you pause the run.

If the time is too soon (the steps before have timers that take longer, or, without a group, there isn't time for the whole sequence), the card says when everything could be ready at the earliest, and Start asks whether to Start anyway without a ready-by time.

Tips

  • Enter the whole time for each item, from going in to being ready.
  • Use short labels. They appear in the timers tray as "Potatoes ready".
  • If things only need to happen at set times, not end together, plain holds or background timers are simpler.

12 / Running a sequence

Running a sequence

Tap a sequence in the Library and then Start Sequence (or use Start Sequence in its ⋮ menu). If that sequence already has a run in progress, you choose Resume (carry on where you left off), Start again (end that run and start afresh) or Abandon run (end it without starting anything, after you confirm). If another sequence's run is in progress, Sequence Pro sets it aside for you; Sequence Lite asks first, because starting a new run ends the old one.

The step screen

  • Top: a close button, the step counter ("02 / 08"), a ⋮ menu and a progress bar with one segment per step.
  • The step: its title, warnings and notes, Items required, the step's notes, pictures, links and checklist, then any step timer or hold.
  • Timers tray: every timer that is running, with how long is left and the time of day it ends ("Ends 14:32"). The step timer's ring and a held step's wait show their end time too; turn this off with Show when timers end in Settings.
  • Bottom: what comes next, a round Previous step button and the main Next step button, which becomes Finish on the last step.

If Next step can't go ahead yet, a short line under it says why: the timer is still running, it hasn't been started, the checklist isn't ticked, or the step is on hold.

Going back, skipping and pausing

  • Previous step (the arrow at the bottom left) undoes the last step you completed. If that step started timers more than a few seconds ago, you choose Keep timers running or Cancel timers. Before you have completed a step there is nothing to go back to, so that button is an X that closes the step screen instead, like the X at the top.
  • Skip (in the ⋮ menu) moves past a step without doing it. Choose Start its timers (as if you had done it, so later holds and groups still work) or Don't start timers.
  • Pause (in the ⋮ menu) stops step timers and holds until you tap Resume. Background timers keep going.
  • Set aside for later (in the ⋮ menu) stops every timer, background ones too, and closes the step screen; the run waits in the Library on its own card for as long as you like. See Setting a run aside.
  • Abandon (in the ⋮ menu) ends the run for good and cancels its timers.

Leaving and coming back

Close the step screen, switch apps or turn the screen off whenever you like: the run is saved after every tap, and its timers keep counting. Back in the Library, Resume on the Pick up where you left off card returns you to it. If you would rather the screen stayed on while a run is open, turn on Keep the screen on in Settings.

Setting a run aside

Need to stop part-way and do something else? Set aside for later in the ⋮ menu keeps the run exactly where it is, with every timer stopped, so nothing rings while you are away. In Sequence Pro, starting another sequence sets the run in progress aside for you, so you never lose your place. Up to 5 runs can be kept at once, each with its own card in the Library; when all 5 are taken, Sequence asks which one to end to make room.

To carry on, tap Resume on its card (or start the sequence again) and choose Resume, Start again to begin afresh, or Abandon run to end it for good. If timers were stopped when you set it aside, Sequence lists them with the time each had left and asks: Carry on the timers from where they stopped, or Restart the timers from their full time (handy when, say, the oven has cooled down). The run you were on is set aside in its place.

Sequence Lite keeps one run at a time: you can still set it aside and come back to it, but starting another sequence ends it, once you agree. A run waiting at Lite's 10-step limit can't be set aside, only ended. A finished run you haven't closed is simply closed, and counts as last done.

Hands-free

Part of Sequence Pro (in Lite you can turn these on and try them in the Sequence tour). Hands full or gloves on? These settings under Running a sequence in Settings help (all are off until you turn them on). Volume down, waving and saying "next" all do the same as the Next step button, and work only while the step screen is open and the app is in front:

  • Volume down for the next step: while the step screen is open, the volume-down key does what the Next step button does (Finish at the end). If the step can't be completed yet, because its timer is running, its checklist isn't ticked or it is on hold, a short message says why instead of a question you would have to tap. Two quick presses count once. Everywhere else the key turns the volume down as usual. A Bluetooth or headset play/pause button may work the same way, but your phone often sends those to the last app that played music, so don't rely on it.
  • Wave over the phone for the next step: pass your hand over the top of the screen, near the front camera, and away again. The phone's proximity sensor (the one that turns the screen off during calls) sees it. Covering it for longer, laying the phone face down or taking it out of a pocket does nothing, and a second wave counts only after a moment. Needs no permission; if your phone has no proximity sensor, the switch is greyed out.
  • Voice commands: say "next", "continue" or "done" (or "finish" at the end) for the next step. Say "back", "previous", "undo" or "return" to go back a step as Undo does: any timers that step started are cancelled, and start again from the beginning when you finish the step again. Say "stop", "dismiss", "silence" or "quiet" to dismiss a ringing alarm. A short phrase such as "okay, next", "go back" or "stop the alarm" works too; longer talk is ignored, so "what's next for dinner?" does nothing. Your words are recognised on your phone by Android, not sent anywhere, and nothing is recorded. Turning it on asks to use the microphone, and Android shows its green microphone dot while the step screen is listening. It needs Android 12 or later and your phone's English speech pack (your phone may offer to download it the first time). It pauses while a step is being read aloud, so it never hears itself. English words only for now.
  • Read steps aloud: each step is read out as you get to it (its number, what to do and its notes), using your phone's text-to-speech, and so is the reason when volume down can't move on.

The run log

When you tap Finish, the run log appears: when each step was reached and completed, which timers ran, anything skipped, undone or overridden, and any step done out of order (with how late it was). You can open it during a run with View log in the ⋮ menu.

13 / Timer alerts

Timer alerts

When a timer ends, Sequence alerts you with a notification and a sound, even if the app is closed, the screen is off or the phone has restarted. The notification is titled with the timer's name and has two buttons: Open, and Next step (Finish on the last step) so you can move on without opening the app. The sound depends on the timer's Sound (see Step timers): an Alarm repeats for about a minute, a Chime plays once and has nothing to dismiss, and a Silent timer only shows the notification. A step timer that moves on by itself sounds once and says where the run went ("Now: Rest"). Chimes follow Do Not Disturb like any notification. While a run is going and the app is in the background, a notification also shows the countdown.

Two phone settings make this work. The first time a timer starts in a run, the app asks for them:

SettingWithout it
NotificationsTimers still count in the app, but nothing alerts you while the app is in the background. The step screen says "Alerts are off": tap that to turn them on.
Alarms & reminders (exact alarms)Alerts can arrive late while the screen is off. The step screen says "Timers may be late"; tap it to open the setting. If you answer Not now, the app doesn't ask again at the next start; the step screen keeps saying so.

To check everything that can stop an alert reaching you, open Settings and, under Timer alerts, tap Check reliability. The Reliability page shows, each with a button to fix it:

  • Notifications and Exact alarms, as above.
  • Battery use. Optimised (the usual setting) is normally fine, because Sequence uses alarm-clock alarms. If alerts are late on your phone, set App battery usage to Unrestricted in App info. Restricted can stop alerts altogether.
  • Do Not Disturb. It silences timer alerts unless you turn on Override Do Not Disturb for the Timer alerts notifications; the button opens that setting.

Settings sums it up in one line ("Everything is set for timer alerts", or how many things need a look).

14 / Folders and categories

Folders and categories

Folders

  • Tap + and then New folder (or New folder beside the Folders heading, once you have one) and give it a name. Folders can hold folders, up to 8 levels deep. Making a folder needs Sequence Pro; folders you already have keep working without it.
  • Tap a folder to open it. The path is shown at the top ("Library › Car › Brakes") with a Back to … button that goes up a level, as the phone's back button does. Library in the bar at the bottom goes straight back to the top level.
  • To put a sequence in a folder, use Move to folder in its ⋮ menu. A new sequence made while a folder is open goes straight into it.
  • A folder's ⋮ menu has Rename, Move and Delete folder. Deleting a folder never deletes sequences: what was inside moves up one level.

Categories

In the editor, pick a Category: Cooking, Repair, Maintenance, Cleaning, Assembly, Setup, Fitness or Other. It is shown on the Library row, and once you use categories, chips appear at the top of the Library to show one category at a time, across all folders. The category travels with the sequence when you share it.

15 / Sharing, importing and backup

Sharing, importing and backup

Share a sequence

Use Share in a sequence's ⋮ menu. If it has pictures, choose With images (the size is shown) or Without images. Your phone's share sheet then sends it as a .seq file: by email, a messaging app, Drive, or saved to your files. The file's name ends "open with Sequence app", because some messaging apps drop the text sent with a file. That wording stays out of your Library: a sequence keeps its own title.

Import a sequence

  • In the Library, tap Import / Browse, then Import, and pick the file; or
  • open a .seq file from Files, Drive, Gmail or a messaging app and choose Sequence.

The app shows the title and number of steps before importing. If you already have that sequence, choose Replace (update yours) or Keep both (the imported one is added as a copy). If you deleted it recently, the preview says so: importing it brings it back to the folder it was in and replaces the copy in Recently deleted. Once one sequence is imported, its overview opens, ready to start. Anything that isn't a Sequence file, is too large, or was made by a newer version of the app is refused with a message saying why.

Back up everything

In Settings, under Backup, Export all (Sequence Pro) saves every sequence in one ZIP file (and asks whether to include pictures). A library too big for one file that Import can bring back (100 MB) is saved in parts, such as Sequence library (part 1 of 2).zip, and the app says so: keep all of them, and import each one. Keep it somewhere safe, or send it to another phone. To bring it back, import the ZIP like any other file: the app asks one question for the whole file, says if any files in it can't be imported, and, for sequences you already have, offers Replace, Keep both or Skip those. Folders are not part of the ZIP, so imported sequences arrive at the top level.

Your phone's own automatic backup also keeps your sequences, folders, pins, default ready-by times and when each was last done, but not pictures and not a run in progress. To get pictures back after moving to a new phone, import an Export all file that included them, or the sequence's own shared file, and choose Replace.

FileLargest size
A sequence without pictures5 MB
A sequence with pictures25 MB
An Export all ZIP100 MB (a bigger library is saved in parts)
A picture inside a sequence4 MB, and at most 8,192 pixels on a side and about 16.7 megapixels

16 / Settings

Settings

Open Settings with the button at the top right of the Library.

SectionWhat it does
Your versionSequence Lite with its limits, or Sequence Pro is activated, and See what Pro unlocks (see Lite and Pro).
AppearanceTheme: System, Light or Dark. Text size: Small (the standard size), Medium or Large, on top of your phone's own text size.
Running a sequenceKeep the screen on while a sequence is open on the step screen; Show when timers end (the time of day beside each countdown, on unless you turn it off) and Show seconds in end times (hh:mm:ss, handy for short timers); Volume down for the next step, Wave over the phone for the next step, Voice commands and Read steps aloud (see Hands-free).
SoundsAlarm sound (for timers set to Alarm) and Chime sound (for timers set to Chime): Play to hear it, Choose to pick one of the sounds on your phone (part of Sequence Pro), and Use the phone's default to go back. The sounds belong to your phone, not to the sequence: a sequence you share plays with the other person's sounds. After choosing a new alarm sound, check Do Not Disturb again on the Reliability page if you had let timer alerts through.
LibraryRecently deleted: sequences deleted in the last 30 days, to restore or delete for good (see What you can do with a sequence).
BackupExport all (see Back up everything).
Timer alertsA one-line summary and Check reliability: notifications, exact alarms, battery use and Do Not Disturb, each with a way to fix it (see Timer alerts).
HelpOpen troubleshooting opens Troubleshooting in this guide. Send feedback opens your email app with a message to FlashAPEX (info@flashapex.co.uk), with the app version and phone model under the space for your message; nothing is sent until you send it. Show the welcome again brings back the welcome cards from your first start. Share Sequence (also the share button at the top of the Library) sends a friend a short message with a link to Sequence. Rate on Google Play opens Sequence's page in the Play Store, where you can rate it (in Lite, a small card at the top of the Library offers the same until you use it or close it with ✕). Share error report: if something goes wrong (a timer that did not ring, a page that would not open), this shares a text file of the errors the app has noted on your phone, with the app version and phone model, to send to FlashAPEX at info@flashapex.co.uk. It holds none of your sequences, and the app never sends it by itself.
AboutThe app version, and this website.

17 / Lite and Pro

Lite and Pro

Sequence Lite is free. Lite sequences from the online library (the tour included) always run in full, and everything inside the first 10 steps of your own sequences is free: timers, holds, finish-together groups, repeats, checklists and pictures. Sequence Pro is a one-time purchase through Google Play that takes away the limits below and adds a few conveniences. Buy it at the foot of the Library (Get more with Sequence Pro, shown until you have Pro), from Settings, or with Get Pro wherever a limit is reached. The name at the top of the Library tells you which you have: Sequence Lite or Sequence Pro.

Lite (free)Pro
Sequences of your own in the LibraryUp to 5Any number
Steps in a sequence of your ownUp to 10 shown and runAny number
Official Lite sequences from the online libraryYes, in full; they don't countYes
Official Pro sequencesNoYes
Runs in progress kept at once1Up to 5
Ready by a set time, hands-free (volume down, wave, say "next", read aloud), looping a whole sequenceIn the Sequence tour, to try themYes
Home-screen shortcuts, Export all, new folders, choosing the alarm and chime soundsNoYes

Trying Pro in the tour

In Lite, the Sequence tour lets you try three Pro features: Ready by a set time on its Overview, How many times to run this Sequence? when you start it from its row or Overview (Take the tour skips that question), and hands-free. Turn on the hands-free switches in Settings under Running a sequence; in Lite they work only while the tour is running, and any other run says so once as it starts. A changed copy of the tour is one of your own, so they don't work there. If your tour came with an earlier version of the app it can't loop yet: delete it and download it again from the online library.

What counts as your own

Every sequence you make, duplicate, import from someone else or have an AI write counts toward the 5. So does an official sequence once you change it, because a change makes it yours; if it has more than 10 steps, Lite then runs only the first 10, and the app says so before you save or duplicate it (Save anyway, Get Pro or Cancel). Official sequences you haven't changed don't count, and they are marked Lite or Pro in the Library. Recently deleted doesn't count either, so deleting one makes room at once; restoring one counts like importing it.

Longer sequences in Lite

A sequence of your own with more than 10 steps (each repeat counted once per item) still imports, with a note. Its Overview shows steps 1 to 10 and what they need, then Continue with Pro. Starting it says that Lite stops after step 10. The run goes up to and including step 10; timers that belong to later steps never start. After step 10 you choose: Get Pro and continue carries on at step 11, or End the run stops it there. In the editor, steps after 10 show Needs Pro: you can delete them but not change them, and you can't add an 11th step.

Restoring Pro

Pro belongs to your Google account. On a new phone, or after clearing the app's data, open Sequence Pro and tap Restore purchase. Pro keeps working when you're offline, as long as Google Play has confirmed it in the last 60 days; after that the app works as Lite until it can check again, then Pro comes back by itself. If a purchase is refunded, nothing is taken out of your Library: everything stays, Pro sequences run up to step 10, and folders and shortcuts you already made keep working.

18 / The online library

The online library

The online library has example sequences for the kitchen, the home, the car, the workshop and the gym, free to download: run them as they are or change them to suit you. Most are Lite; a few, such as Christmas dinner for 8, Sweet-spot turbo session and Morning routine, are Pro and need Sequence Pro to run. In the app, tap Import / Browse, then Browse, to open it in your browser.

  1. Find a sequence (filter by tag or sort the list) and tap Download.
  2. Open the downloaded file from your browser's download notification or from Files, and choose Sequence.
  3. Check the preview and tap Import. It is now in your Library, ready to run or to edit.

Every sequence in the online library is made and signed by FlashAPEX, and marked Lite (free, and doesn't count toward Lite's 5) or Pro (needs Sequence Pro). A signed sequence stays official when you share it without changing it. To pass on one of your own, use Share in the app (see Sharing, importing and backup). To offer one for the online library, use Suggest for the library in its ⋮ menu: your email app opens with a message to FlashAPEX and the file attached, and nothing is sent until you send it. Say what it's for and the name to credit, if any. If it would help other people, we try it, sign it and add it to the library.

19 / Troubleshooting

Troubleshooting

A timer didn't alert me

Check Notifications in Settings under Timer alerts. If alerts came late, turn on Alarms & reminders there too. Some phones also have their own battery savers that can delay apps; letting Sequence run unrestricted in your phone's battery settings helps.

Next step won't go ahead

Read the line under the button: a step timer is still running or hasn't been started, the checklist must be ticked first, or the step is on hold until an earlier timer ends. A running step timer can be overridden; a hold can't, because a later step depends on it.

I can't save a sequence

Look for steps marked in red in the editor. Common causes: a step with no title, a hold pointing at an earlier step (often after moving steps), or a finish-together group whose items aren't in the sequence longest first.

A step says its pictures aren't on this device

The sequence came from a backup or a file without its pictures. Import the sequence's file again, one shared With images or an Export all that included pictures, and choose Replace.

A file won't import

The message says why. "This isn't a Sequence file" means it is something else; "made with a newer version of Sequence" means the app needs updating; "too big to import" means it is over the limits in Sharing, importing and backup. If another app doesn't offer Sequence when you open a file, save the file to your phone and use Import in the app instead.

Back to the top